[admin]

https://www.g-wei.com.cn/How-to-avoid-damage-to-automatic-wire-feeding-machine.html

The automatic screw locking machine is an indispensable piece of equipment in modern industrial production. It can quickly and efficiently complete screw tightening work and improve production efficiency. However, during use, many users find that the bits of the automatic screw locking machine are very easy to damage, causing problems such as screw thread slippage and too loose locks, which affects work efficiency. So, how to avoid damage to the automatic wire feeding machine?

First, we need to understand the reasons why the automatic wire feeding machine is damaged. According to the statistical analysis of sales market research data, there are three main reasons why the automatic wire feeding machine is damaged:

1. The torque compressive strength of the screw is greatly increased, resulting in high pressure on the bit and screw. This will definitely cause the bit to be less durable.

2. The material of the screw is relatively hard. If the screw is harder than the material of the bit, the bit will be damaged quickly.

3. The quality of the batch is poor. If it is not used for three or two days, it will be damaged.

So, how to avoid damage to the automatic wire feeding machine? Here are some suggestions:

1. Improve the strength of the bit

In order to avoid bit damage, we can increase the strength of the bit. This can be achieved by improving raw materials, quenching and tempering to increase hardness, etc. At the same time, we can also choose bits with good quality and good hardness, which can better protect the bits and extend their service life.

2. Improve screw materials

In addition to improving the strength of the bit, we can also improve the material of the screw. Choose screws with moderate hardness to reduce damage to the bit. In addition, we can also choose screws of different materials according to different working environments and needs to achieve better results.

3. Adjust the torque range

When using an automatic locking screw machine, we need to adjust the torque amplitude according to the size and material of the screw. If the torque is too high, it will cause excessive pressure on the bit and cause damage. Therefore, we need to adjust the torque amplitude according to the actual situation to protect the bit.

Gewei specializes in the production of automatic wire feeding machines. Our machines are of high quality and stable performance, ensuring work efficiency and safety.

https://www.g-wei.com.cn/Application.html

Vivi
sales@g-wei.com

[Author]

Posts